With a large 120 mm diameter spindle combined with an 18.5/15 kW motor, the cutting
capacity is 1.8 times higher than with our previous models. The machine is capable of heavy-
duty, high-torque cutting even at the low speeds required for cutting large-diameter flanges.
A spindle cooling mechanism is built into the unit to reduce geometric changes due to heat.
Dimensional accuracy and stability can be achieved with a spindle cooler.
| Clamping head size | inch | 10 × 2 |
| Spindle bearing (inside diameter) | mm | φ120 |
| Spindle revolutions | rpm | Max. 2,800 |
| Turret | 8-places | |
| Max. stroke | mm | X:170 Z:220 |
| Quick stroke | m/min | X:24 Z:24 |
| Spindle motor | kW | AC18.5/15 × 2 |
| Dimensions (L x W) | mm | 1,990 × 2,330 |
| Controller | TAKAMAZ & FANUC | |
All rights reserved © 2023. Robomac d.o.o.
